Axidraw EBB Controller Emulator Example

Overview

This example demonstrates using a Stepdance Interface module to emulate the AxiDraw EBB controller so that the standard Inkscape extension can drive the machine. It builds on the Step-A-Sketch Example real-time jogging example by adding:

• An Interface module that accepts pre-planned motion commands (G-code or SVG-derived paths).
• An Interpolator that converts these commands into real-time motion streams.
• A real-time speed control via an analog input (e.g. a potentiometer) mapped to interpolator velocity.

Additional documentation and wiring details will be expanded here.